[M110] How to avoid blurred/missing prints
Blank printouts are usually caused by the following reasons:
Insufficient power, Dirty printhead, Poor picture clarity, Deterioration of printing paper
Blank printouts are usually caused by the following reasons:
Insufficient power, Dirty printhead, Poor picture clarity, Deterioration of printing paper
1.Keep the printer fully charged
Be sure the battery level is higher than 30%. In the event of low battery conditions, the lack of voltage may result in a loss of print clarity.
2.Be sure to choose the right paper.
Because of the difference in materials, choosing the wrong paper may result in poor printing results.
3. A dirty print head or adhesive on the print head can also cause poor print quality.
Wet a cotton swab with alcohol, gently wiping the print head. Note that the main thing to do is to clean the black line.
Please see image/video provided for reference.
4. Keep the paper in a dry, cool place out of direct sunlight.
If the paper roll is kept in a humid environment or exposed to direct sunlight for a long time,
the thermal reactive layer may deteriorate and the image may not be displayed properly.
1. Thermal paper should be stored in a dry, cool environment. When not in use, keep it sealed to avoid exposure to direct sunlight, humidity, open flames, heat sources, or high moisture conditions.
2. Under conditions of 0-35°C with 65±5% relative humidity, single-layer and triple-layer thermal materials can preserve their print quality for 2 to 3 years.
3. The printed side should not be stuck face-to-face, should not come into contact with packing tape, and should not touch plastic wrap, as this may cause fading or discoloration.
4. Consumables should have external packaging, preferably sealed in plastic film. After each use, reseal the packaging properly. Rolls should be stored upright.
5. If after trying the above steps, your problem is still not resolved.
Email: bestservice2012@outlook.com
(1)Please record a video to show us the problem : switch on the printer and tap the power button, then switch to the Test Print option to print the self-test page.
(2)Please send the video to us (the video will be used as an important after-sales proof)
(3)Please provide your order number and time of purchase.
(4)After we confirm your information, we will provide you with a better solution.
Related Articles
[P12] How to avoid blurred/missing prints
Blank printouts are usually caused by the following reasons: weak battery discharge performance, Insufficient power, Dirty printhead, Poor picture clarity, Deterioration of printing paper 1. Confirm the battery type and whether the power is ...[D30] How to avoid blurred/missing prints
unclear printouts are usually caused by the following reasons: Insufficient power, dirty printhead, poor picture clarity. 1.Keep the printer fully charged Be sure the battery level is higher than 30%. In the event of low battery conditions, the lack ...[D30] How to Avoid Offset Prints
Print offset are usually caused by the following reasons: Incorrect label position when printing, wrong template of label selected, Use Unofficial labels, Incorrect label placement 1. Verify that the label is official and installed correctly. Place ...[M110] How to Avoid Offset Prints
Print offset are usually caused by the following reasons: Wrong paper size filled, wrong type of label selected, paper roll not loaded correctly, Use Unofficial labels 1. Verify that the label is official and installed correctly. Labels are placed to ...[D30] How to avoid blank printouts
Blank printouts are usually caused by the following reasons: The print head is covered, The paper is loaded backwards, The paper's gone bad. 1. Be sure load the paper in the true direction Since only one side of the thermal paper can be printed, ...